Pyrolysis Applications & Reprints
Applications available can be viewed here or requested individually.
- Getting started in pyrolysis is easy
- Multi-step analysis of coal by pyrolysis-GCMS
- Multi-step analysis of automobile Tyre rubber
- EGA and the identification of a clear polymer
- Detection of polymers dissolved in sea water
- Pyrolysis of coal under steam and elevated pressure PYGC
- Pyrolysis and reactant gas to detect and study antimicrobial agents
- Analysis of circuit board with pyrolysis high resolution TOF
- EGA and pyrolysis evaluation of source rock
- Epoxy to hardener ratio quantitation
- Methyl methacrylate in copolymer quantitation
- Biomass feedstock four step pyrolysis
- Soil studies with thermal desorption and pyrolysis
- Fluoropolymer pyrolysis
- Polyvinyl alcohol FGA and pyrolysis
- Fibre blend pyrolysis
- Coal FGA and pyrolysis
- Epoxy and polycarbonate pyrolysis
- Biomass gas analysis
- Liquid injections using a pyroprobe
- Fragrance analysis with microtrap
- Polyethylene pyrolysis in different atmospheres
- Additive identification using GCMS pyrolysis library and AMDIS
- Food packaging tri-step pyrolysis
- Evolved gas analysis of a polyurethane foam
- Evolved gas analysis of polymers
- Powder coatings
- Characterisation of artificial sweeteners
- Characterisation of indoor dust
- Catalytic hydrogenation of vegetable oil
- Crude oil determination of polymethyltrifluoropropyl siloxane PMTFPS
- Tobacco in air
- Oil shale in hydrogen at elevated pressure
- Crude oil hydrogenation at elevated pressure
- Soy clothing fibre
- Coffee, tea, and cocoa extraction
- Biodegradable plastic packaging
- Algae pyrolysis using TMAH
- Plant derived (cellulosic) textiles pyrolysis GCMS
- Identifying additives using pyrolysis and deconvolution software
- Switchgrass pyrolysis at elevated pressure
- PEEK preparation - detecting differences in preparation using pyrolysis
- Olive oil and oleic acid cracking products - biofuel application
- Brominated fire retardants in PET
- Plant material pyrolysis GCMS - biofuel application
- Switchgrass pyrolysis GCMS - biofuel application
- Biofuel analysis by pyrolysis GCMS - biofuel application
- Pyrolysis of natural and synthetic adhesives
- Laser toner analysis by pyrolysis/GCMS
- Tobacco analysis using 4 step analysis
- Tobacco pyrolysis GCMS
- Packaging tape multistep analysis
- Layered paint analysis using pyrotomy
- Brominated flame retardant analysis
- Rubber with antioxidant 6-PPD pyrolysis
- PVC copolymer multistep analysis with pyrolysis/GCMS
- Biochemical sample analysis (DNA) by pyrolysis/GCMS
- Nylon analysis using rapid pyrolysis/MSD
- Advantages of two-step pyrolysis
- Tri-step analysis of latex materials
- Tri-step analysis of chewing gum
- Eight-step analysis of fly ash
- Reproducibility in pyrolysis
- Antioxidant detection in petroleum wax
- Coating analysis on pharmaceutical tablet forms
- Cosmetics analysis (mascara) by pyrolysis/GC
- Cosmetics analysis by pyrolysis/GCMS
- Engine Lubricant analysis by pyrolysis
- Pyrolysis gas chromatography of amino acids
- Polyolefin analysis by pyrolysis/GC
- Pyrolysis/GCMS of clothing fibres, cotton and polyester
- Analysis of hair samples by pyrolysis
- On column cryofocussing for improved resolution in pyrograms
- Pyrolysis of synthetic polymers - improved sensitivity using cryogenic focusing
- Degradation mechanisms - random scission
- Degradation mechanisms - side group elimination
- Degradation mechanisms - depolymerisation
- Pyrolysis/GC of natural fibres
- A comparison of nylons by pyrolysis/GC
- Capillary GC of polyolefin pyrolysates
- Analytical pyrolysis of surfactants
- Dynamic headspace and pyrolysis in ink analysis
- Direct pyrolysis/FTIR: An alternative sampling system
- Analysis of acrylate polymers by direct pyrolysis/FTIR
- Analysis of polyvinylchloride by direct pyrolysis/FTIR
- Parameter optimisation in pyrolysis/FTIR
- Quantitative determination of polypropylene-1-butene
- Quantitative pyrolysis/GC in the analysis of co-polymers
- Analysis of soil samples using the HTD
- Pyrolysis/FTIR of carbon filled rubbers
- Pyrolysis/GC of carbon filled rubbers
- Analysis of photocopier toners by pyrolysis/FTIR
- Pyrolysis/GC of polyolefins
- Analysis of vulcanised rubber by pyrolysis/GCMS
- Desorption of PCB's from soil using the HTD
- Pyrolytic injection inlet autosampling system for the analysis of polymer samples
- Pyrolysis/GCMS of automobile paints
- Polyurethane analysis by pyrolysis/GCMS
- Pyrolysis/GC of high and low density polyethylene
- Quantitation of ethylene/propylene copolymers
Micro gas analyser applications and datasheets
Applications available can be viewed here or requested individually.
- Acetone, n-hexane, MIBK, and MIBC analysis
- BTEX analysis
- Liquified ethane product analysis
- On-site mine safety analysis
- Oxygen and nitrogen analysis
- Biogas analyser datasheet
- Biogas analysis
- Biogas analysis
- Refinery gas analysis
- Natural gas analyser data sheet
- Natural gas analysis
- Natural gas analysis - sulphur compounds
- Natural gas analysis - tert-butyl mercaptan
- Natural gas analysis - tetrahydrothiophene
- LPG analysis - propane and butane
Supercritical Technologies SFE/HPR applications & posters
Applications available can be viewed here or requested individually.
- Particle formation using supercritical carbon dioxide
- Investigations in supercritical fluid reaction chemistry: Synthesis in non-traditional media
- Chemical reactions utilising supercritical fluids
- Supercritical fluid technology for separation from solid and liquid feed stocks
- Current status & technical challenges of liquid carbon dioxide dry cleaning
- Extractions of binder from powder injected metals using supercritical fluids
- Processing pharmaceuticals with supercritical fluids
- Supercritical fluid extraction of nutraceutical products
- Oil of catnip by supercritical fluid extraction
- Effect of operating conditions on static/dynamic extraction of peanut oil using supercritical carbon dioxide
- Solubilities of substituted phenols in supercritical fluid carbon dioxide
- Application of near critical/supercritical solvent cleaning processes
- Positive-tone resist for supercritical CO2 processing
- Economic feasibility study on the supercritical fluid extraction of edible oils
- Crystal doping aided by rapid expansion of supercritical solution
- Assessing technical feasibility of supercritical extraction processes utilising laboratory equipment
- Solubility studies utilising a phase monitor
- Study on critical points of carbon dioxide + single and multicomponent solid solute systems
- Low-temperature growth of carbon nanotubes from the catalytic decomposition of carbon tetrachloride
- Supercritical fluid technology-green chemistry for the 21st Century
- Design and process aspects of laboratory scale SCF particle formation systems
- Compression and condensation of CO2
- Supercritical fluid facilitated growth of copper and aluminum oxide nanoparticles
- Assessing feasibility of supercritical reaction processes using laboratory equipment
- Assessing technical feasibility of supercritical extraction process occurring materials using benchtop laboratory equipment
- Extraction of natural ingredients from natural feedstock's using supercritical fluids
- Determining the solubility, cloud point, swelling and crystallisation properties in supercritical carbon dioxide